Shanghai Shunky is found in recent years, the company has developed a new automated intelligent sand making equipment - 6S series Sand making machine, once it has been put into production and recognized by many domestic counterparts, and it is highly spoken by customers.

New Sand making machine is based on the working principle of impact crusher and hammer crusher, it is fine crushing equipment which had transformed the comprehensive restructuring of the crushing equipment. When it is working, we need to stop to observe the inside of the machine ,when it is badly worn, we need to replace or repair; replace the original hammer should guarantee the same model, the quality is the best. Nonnormal operation is not allowed to observe the crushing chamber, it is to avoiding danger. They use grease 3 # lithium grease. 2 classes per job, you need to add the right amount of grease, when it is working 2000 hours ,we need open spindle bearing assembly for cleaning, general working 7200 hours and then replace bearings. Transmission Vbelt tension should be appropriately adjusted periodically to ensure uniform force triangle tape.

When equipment during operation, highspeed operation of the state should pay particular attention to safety, if necessary, repair the machine should turn off the machine.

Note that the new Sand making machine’s maintenance and security, this not only can reduce the chances of equipment downtime due to failure, but also keeping safe production. Shanghai Shunky has been committed to crushing equipment, sand making equipment, such as R & D and production, new Sand making machine’s upgrades will be able to fully meet the requirements of the majority of gravel producers.